Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - SakuraNekoGamer

Pages: [1] 2
Sure, that is fine. Since you have multiple drives, it probably indicates that the drive was split and the OS was installed on one part, with programs going on the other (E drive) part.

Those numbers you gave me, your C drive has 55.8GB.

Is that 55.8GB the total size of the drive, or is that 55.8GB the amount of free space left available?
Total Size.

Well, that's the price of playing Spore, unfortunately. If you don't free up some space on your C drive (or which ever drive your Operating System is installed on), you won't be able to save games beyond a certain point.
There is an issue, though. Uh.... So... My C drive only has 55.8 GB. Is that normal? When our extra E drive has 456?

This is probably your issue.

While the game is installed on your E drive, the save location is most-likely on your C drive, which is desperately short on space. You're going to need to free up space on your C drive, it should solve some of your issues. I've just looked into it and it seems as if Spore is hardcoded to route saves to the C drive, specifically your AppData region. You won't be able to undo this without some serious work in the registry, and I don't want you tinkering around in there. :P

Try to keep two to five gigs of free space on your C drive.

Hey how much free hard drive space do you have?
Uh I downloaded it on our E drive, Which is almost empty, But our C drive is almost full, so cuz of the overload, I put it on E. Most games and stuff go on E. Our C drive was very small.

Okay, so I was finally done. I let go all of my data, sobbing all the way, And 100% restarted Spore. So, The first 2 times I played it, I was crying of happiness, cause after 8 months, it worked again. The 3rd time, seemed normal, and I went into my file in the creature stage and made it all the way to space stage! (In my previous version, i could never get past the tribal stage, cuz it did not let me. It crashed on the loading screen for the whateveryoucalit stage, I DONT CARE ABOUT NAMES!!! So, after I made my spaceship, Well, no duh, i began playing... But there was something really odd... Where it is supposed to display a photo of your spaceship in the corner, It showed a white box with a red "X" across it. So, then, After getting past the first 2 segments of the space stage, I decided to save again. (Last save was in the WHATDOYOUCALLIT stage, I ALWAYS FORGET ITS NAME!) And then, When I clicked save, It said; "There was an error saving. Spore will now restart and revive your previous save state." So I was like "Okay... I hope this doen't take too long... I mean... Its only in the end of last stage that I saved, Right?" Well... WRONG!!! My planet... GONE! In tears, I looked at my creations, and all the creations from that one but 1 were normal... My spaceship. My spaceship icon was the white with red x! while upset, I then created a new world. So, then, When I was in cell stage, I looked at the corner box, and it was the red x white box... So.. Something is fishy... So, I then saved, Cuz I had made it to the creature stage. IT TOLD ME THE SAME THING. I was so mad---- Please help! I already have issues!!!!!! :'( :'( :'( :'( :'( :'( (This better?)

Try this link for how to do it. It is for Linux but it works the same way in windows. Just add -w at the end of the start-up.

On in steam go and click on the right click games name in you game list and select properties. Then select set launch options. And add -w
wait, there is no audio in the background. Its just silence black with animated cursor...

Try this link for how to do it. It is for Linux but it works the same way in windows. Just add -w at the end of the start-up.

On in steam go and click on the right click games name in you game list and select properties. Then select set launch options. And add -w
I will try

Spore: General / Re: Spore Read Me
« on: December 11, 2016, 07:08:46 pm »

Spore: General / Spore Read Me
« on: December 11, 2016, 02:24:50 pm »

Readme for Spore(tm)
(c)2008 Electronic Arts Inc. All Rights Reserved.

MAXIS(tm) 9/01/08
Version 1.0

== Table of Contents ==
System Requirements
Known Hardware Issues
Performance Tips
Controls and Shortcuts
Compatibility Notes


Welcome to Spore! We hope you'll have a lot of fun with it.
For the latest up-to-date information on the game and
associated products, please visit

System Requirements

Spore requires at least the following:

* 2.0 GHz P4 processor or equivalent
* 512 MB RAM
* A 128 MB Video Card, with support for Pixel Shader 2.0
* The latest version of DirectX 9.0c
* Microsoft Windows XP Service Pack 1
* At least 4 GB of hard drive space, with at least 1 GB
additional space for creations

* 2.0 GHz P4 processor or equivalent
* 768 MB RAM
* A 128 MB Video Card, with support for Pixel Shader 2.0
* At least 4 GB of hard drive space, with at least 1 GB
additional space for creations.

For computers using built-in graphics chipsets under Windows,
the game requires at least:
* Intel Integrated Chipset, 945GM or above.
* 2.6 GHz Pentium D CPU, or 1.8 GHz Core 2 Duo, or equivalent.
* 768 MB RAM

* Mac OS X 10.5.3 Leopard or higher
* Intel Core Duo Processor
* 1024 MB RAM
* ATI X1600 or Nvidia 7300 GT with 128 MB of Video RAM, or
Intel Integrated GMA X3100.
* At least 4 GB of hard drive space, with at least 1 GB
additional space for creations.

This game will not run on PowerPC (G3/G4/G5) based Mac systems, or
the GMA 950 class of integrated video cards.

Supported Video Cards

NVIDIA GeForce series
FX 5900, FX 5950
6200, 6500, 6600, 6800,
7200, 7300, 7600, 7800, 7900, 7950
8400, 8500, 8600, 8800
9600, 9800, GTX 260, GTX 280

ATI Radeon(TM) series
9500, 9600, 9800
X300, X600, X700, X800, X850
X1300, X1600, X1800, X1900, X1950
2400, 2600, 2900,
3450, 3650, 3850, 3870,

Intel(R) Extreme Graphics
Windows: GMA 950, GMA 3x00 series
Mac OS X: GMA X3100

Laptop versions of these chipsets may work, but may run
comparatively slower. Standalone cards that are installed in
vanilla PCI slots (not PCIe or PCIx or AGP), such as some
GeForce FX variants, will perform poorly. Intel integrated
chipsets featuring underclocked parts, such as the 945GU, GML,
and GMS, will not perform adequately.

Integrated chipsets such as the ATI Xpress and the NVIDIA
TurboCache variants will have low settings selected, but
should run satisfactorily.

Please note that attempting to play the game using video
hardware that isn’t listed above may result in reduced
performance, graphical issues or cause the game to not
run at all.

The NVIDIA GeForce FX series is unsupported under Vista.

Known Hardware Issues

The game may become unresponsive while painting your creature,
or after switching between fullscreen and windowed. To fix
this, update your graphics drivers from the vendor website.

When changing the display size, in some situations the
monitor may not respond to a resolution it claims to support,
showing a black or distorted display. If this occurs switch
to windowed mode, and then change the resolution and
refresh rate back to smaller values.

Audio hardware acceleration is unsupported.

Windows Vista:
When launching the game, some Microsoft Vista users may
receive a warning about running out of address space along
with a link to the Microsoft Knowledge Base. If you see this
message, it is recommended that you follow the instructions
and go to the website listed in the message to update
your system.

Turtle Beach Montego DDL - Surround 5.1 is not supported.
This mode is available in the options, but sound will be
in Stereo (2 Channel) for all speakers.

Mac OS X:
On Mac OS X systems that have NVIDIA cards with less than
256 MB of VRAM, you may need to reduce the graphics quality
through the methods described in General Troubleshooting
for improved graphics quality.

If running the game on a Mac Book Pro with display mirroring
turned on, ensure that you select a resolution which is
supported by both the internal and external displays.
A workaround for this issue is to ensure that the internal
LCD is the main system monitor before turning on display
mirroring, and you will be presented with the proper

Occasionally the game audio will stop playing when headphones
are connected after the game is started. In order to prevent
this from occurring, please ensure that your headphones are
connected to your Mac before starting the game.

If you experience frame rate issues while running on ATI X1600
or X1900 cards, reduce your Lighting Quality setting to low.

Performance Tips

When you run Spore for the first time, the game will
automatically select the most appropriate options for your
graphics card, CPU, and audio card. To improve performance,
use the options control panel to lower settings to
"medium" or "low".

You can also improve the performance of the game by
lowering the resolution the game runs at, to 1024 x 768
or 800 x 600. It is not recommended that you run at
fullscreen resolution if your monitor resolution has a
height or width of 1600 or larger.

Spore is a real-time 3D game that requires the majority of
your computer's processing power. Other programs operating in
the background may slow it down or cause hitches. For best
results, be sure to close any background applications while
playing Spore.

Fullscreen performance is generally better than windowed


Spore Error Messages

Below are some error and warning messages you may see from the
game, along with suggestions for fixing them.

1000: Another instance of Spore is already running. Please
quit or kill it first.

1001: The game cannot find any valid display modes. Please
ensure your display is set to 32 bits.

1002: Direct X is not installed. Please install it, or reinstall
the game.

1004: The game cannot find its data directory. Please reinstall
the game.

1010 It is recommended that you update your graphics card
drivers to avoid compatibility issues. Generally you can
do this by going to the website of the hardware manufacturer
for your card. The sites for NVIDIA, ATI, and Intel are:

1011: It is required that you upgrade your graphics card drivers
to avoid serious issues with the game. Please see above.

1012: The game has issues with this card in multi GPU mode. Please
either update your drivers, or disable multi GPU mode from
the vendor's control panel.

2001: The system is below our min spec, and we cannot run at all.

2002: The system is below our min spec, and you may experience
graphical, performance, or audio issues.

2003: You are running a version of Vista that has issues with
graphics cards with large amounts of VRAM. Please either
update to SP1, or install the corresponding fix from

Online Help

The Electronic Arts Customer Support site is located at

for North American users or

for European users.

Use the search tools to find the information you need. The
Knowledge Base is updated as new information becomes available,
so check back for the latest news and information.

Installing the Game

Windows (disc users):
* Insert the disc into your disc drive and follow the on-screen instructions.
* Once the game has installed you can launch it by locating the game
through the Start menu.
* Games on Windows Vista™ are located in the Start > Games menu and on
earlier versions of Windows™ in the Start > Programs (or All Programs) menu.

Windows (EA Store users):
* Once the game has been downloaded by EA Download Manager, click the install
icon that appears and follow the on-screen instructions.
* Launch the game (once it is installed) directly from the EA Download Manager.

In Windows Vista Classic Start menu style, games are located in the
Start > Programs > Games > Games Explorer menu.

Mac OS X:
* Insert the game disc into your CD/DVD-ROM drive. A CD icon
representing the game disc appears on your desktop. Double-
click the icon to open the game’s launcher.
* Select the game’s installer icon at the bottom of the
launcher to prompt the installation menu.
* Follow the on-screen instructions to complete the

Digital Retail Installation

Please contact the digital retailer through whom you purchased
this game for instructions on how to install the game or how
to download and reinstall another copy of the game.

Note: If you’d like additional information about your game as
well as tips and patches please visit or

Uninstalling the Game

Windows XP:
* Open Add or Remove Programs in Control Panel.
* Click on Change or Remove Programs.
* Click on the SPORE program entry.
* Click on the Remove button.
* Follow the on-screen instructions to complete the

Windows Vista:
* Open the Programs and Features control panel.
* Click on the SPORE program entry.
* Click on the Uninstall button.
* Follow the on-screen instructions to complete the

Mac OS X:
* Ensure you are logged in using an account which has
Administrative privileges.
* Delete the SPORE folder from your Applications folder.
* Additional files can be found in
/Users/<Username>/Library/Preferences/Spore Preferences
* To remove the content created by Spore, remove the folder
/Users/<Username>/Documents/My Spore Creations

Locations On Disk

Spore keeps your creatures, movies, pictures,
and animated avatars in a folder called "My Spore Creations".
The location of this folder depends on your OS:

Windows XP:
* "My Spore Creations" is located in your "My Documents" folder.

Windows Vista:
* "My Spore Creations" is located in your “Documents” folder.

Mac OS X:
* "My Spore Creations" is located in your “Documents” folder.

Spore also keeps a cache of the graphics assets for pollinated
content you have downloaded. If you are short on disk space,
try reducing the size of that cache in the graphics options.

Controls and Shortcuts

- Creature Creator -

Left Click to select and move parts.

Left Click to move the arrow-shaped handles on the currently
selected part, which changes its shape.

Left Click and drag parts off the creature to sell them back.

Mouse over a part or a spine segment and use the mousewheel to
scale the size. Or, select the part, and use the up and down
arrow keys.

Hold Alt while clicking and dragging a part to copy it. On
Mac systems, use Option instead of Alt.

Left Click and drag directly on the spine to change the spine
shape. Use the arrows to length or shorten the spine.

Left Click on the torso skin (not the spine) to move it.

Hold Control while dragging a limb segment to attach it to
another limb.

Hold Tab when a part is selected to reveal additional rotation

- Building Creator -

To move a part vertically, press and hold Control while you click
a part and reposition it with your mouse.

To move a part across the surface of the dais, press and hold
Shift while you click a part and reposition it with your mouse.

- Vehicle Creator -

Body and cockpit parts automatically align down the center of the vehicle.

There are limits to the height and width of any vehicle.

To move the entire vehicle, press and hold Shift while moving the mouse.

- Camera -

Left Click on the background moves the camera around.

In test drive, mousewheel zooms the camera in and out.

In build and paint modes, shift and mousewheel zooms the
camera in and out.

< and > Rotates the camera
+ and - Zooms in or out

- General -

Control-N Start New
Control-Y Redo
Control-Z Undo
Control-S Save
Control-H Toggle whether the UI is hidden
H or ? Bring up or close the Spore Guide
B Bring up the Sporepedia™

Alt-Enter Toggle between windowed and fullscreen modes.

Mac OS X:
Command-Return Toggle between windowed and fullscreen modes.
Command-Tab Minimize the game when in fullscreen mode.

Note that when the game is minimized, it will not pause,
but will continue running in the background.

- Right Mouse Button Functionality on Mac OS X -

This game contains features that require a right mouse button.
If you have an Apple Mighty Mouse, you can enable the Right
Mouse Button in System Preferences->Keyboard and Mouse. Change
the "Right Click" drop down to Secondary Button.

To emulate the clicking of both buttons simultaneously using the
Apple Mighty Mouse, hold down the scroll button or click the left
mouse button while holding down the Command and Option keys.

As well, most PC USB mice are supported on the Macintosh.
The Left and Right mouse buttons are detected and work
correctly on these mice when first plugged in.

If you have an Apple legacy single button mouse, or a MacBook
Pro with a Track Pad, you can emulate a right mouse button
click by holding down the Command key while clicking the mouse

To emulate the clicking of both buttons simultaneously using a
single button mouse, hold down the Command and Option keys while
clicking the mouse button.

Command Line Options

The following command-line options are supported:
-w Run in windowed mode.
-f Run in fullscreen mode.
Run at the given resolution.
-safe Force a minimum set of configuration options, and
don't load any optional plugins.


To enter cheats in the game, first open the command console by
simultaneously pressing ctrl-shift-c. Press the enter button
to close the command console. Some of the cheats that can be
used here are as follows:

help: lists all the cheats in the game.
help [cheatname]: displays specific information about the cheat.
quit: quit game.

Compatibility Notes

Spore is designed to run on Windows XP compatible graphics and
sound cards. Drivers for these devices are provided by the
respective card manufacturer and may result in compatibility
issues beyond our control.

If you are experiencing any issues, it is always recommended
that you obtain and install the latest drivers for your
hardware. The majority of hardware vendors have the latest
drivers available for download via their websites.

More information on known technical issues is available at

Thanks for playing Spore!
The 'Spore' Team

Really weird. Have there been any updates? Like you graphics card or the game it self?

You can try to run it in windowed mode and see if that helps. It might be just slow loading. I saw some said you can force it to run on a dedicated CPU core and that might help. You have to mix with the task manager then which can be iffy if you not that well versed with computers. So try window mode first.
How do I do that...
And no, no updates that I am aware of...

Could be. Though I do not think a clean steam version would actually have you stuff. You can try to make a backup of those file and put them in to a compressed folder that the game can not reach and test.

You did run it in the past with you current setup?
Yeah! But Without the steam version, not too long ago, it was fine... Then, on thanksgiving, it wouldn't work!

Spore: General / Re: Uninstall Unsafe?
« on: December 09, 2016, 06:55:13 pm »
I don't think I've ever had problems installing or uninstalling Spore, so sure, go ahead and see if it works dude
Uh okay...

Spore: General / Uninstall Unsafe?
« on: December 07, 2016, 02:15:10 pm »
I do not know if it is safe to use the uninstall spore item. Because, i belive that thge corrupt copy of disk spore is causing my brand new steam spore that I got 3 minutes ago not to work.
Why?!?!Used to play it all the time, as seen previously
So can you please help?
In threads, i have read it is unsafe to uninstall EA games...
Am I
Safe with it?

Well you could try to check in your  Operating System. I do not know what Operating System you use however so I can not say exactly how you do it until I know. But I take it your not super experienced with computers.

Anyway is a bit hard to guide you with the limit information we got now.
I just got gifted the steam one, and it won't run either... do you suppose its an issue with a file in my classic spore causing both to fail? like a corrupted save file?

Pages: [1] 2